Stainless Steel Metal Stamping Parts Processing

Automobile stamping parts

As the name suggests, it is the metal stamping parts that make up the parts of an automobile. In the automobile stamping parts, part of the stamping directly into the automobile parts, the other part of the stamping after welding, or mechanical processing, or paint and other processes to become auto parts.
There are many varieties of automobile stamping parts, such as automobile shock absorber stamping parts spring tray, spring seat, spring bracket, end cover, cover, compression valve cover, compression valve sleeve, oil seal seat, bottom cover, dust cover, impeller, oil cylinder, lug, bracket, etc., all belong to automobile stamping parts.
Raw material:
We support all kinds of metal raw materials. Copper, brass, copper powder, copper-covered steel, 45 steel plate, 304, new white copper, aluminum, castings and so on.

Product features

(1) The stamping parts have high dimensional accuracy, uniform size with the module, and good interchangeability. General assembly and use requirements can be met without further machining.
(2) Cold stamping parts are generally no longer cut, or only need a small amount of cutting. The precision and surface state of hot stamping parts is lower than that of cold stamping parts, but it is still better than castings and forgings, and the cutting amount is less.
(3) In the stamping process, because the surface of the material is not damaged, it has good surface quality, smooth and beautiful appearance, which provides convenient conditions for the surface painting, electroplating, phosphating and other surface treatment.
(4) The stamping parts are produced by stamping under the premise of little material consumption. The parts are light in weight and good in stiffness. After the plastic deformation of the sheet metal, the internal structure of the metal is improved, so that the strength of the stamping parts is improved.
(5) Compared with castings and forgings, stamping parts have the characteristics of thin, uniform, light and strong. The workpiece with reinforcing ribs, ribs, undulation or flanging, which is difficult to make by other methods, can be produced by stamping to improve its rigidity.

Processing quantity: quantity is not limited, large quantity is better.
Quotation method: telephone discussion, email, quotation sheet.
1. According to the processing difficulty of metal stamping parts samples or drawings;
2, parts processing hours, required equipment mold;
3. Precision tolerance requirements of parts;
4, other surface treatment and special requirements.